The roller that keeps the print even
Precise rubber coverings on steel cores, built for offset presses. Made for long runs and even ink transfer.
Shore A 20–100 · ink, dampening & silicone rollers · 24-hour recovery
Made for the press you run
No two presses are exactly alike, so the rollers we build for them aren't either.
Matched to your press
We check your press and the job first, then set the covering, hardness and diameter to match.
Every roller, in-house
Rubber, silicone and solid rollers, plus recovering, polishing and resurfacing, done in the same workshop.
Back running, fast
When a press goes down, we recover or rebuild the roller and turn it around in 24 hours.
Selected products
Rubber
Ink Form Roller
Carries ink to the plate with an even, controlled film.
Hardness (Shore A): 25–35
Rubber
Dampening Roller
Meters fountain solution evenly to keep non-image areas clean.
Hardness (Shore A): 20–30
Silicone
Silicone Roller
Heat-resistant white silicone for release and specialty work.
Hardness (Shore A): 20–40
What makes a good roller
Every covering we make is built to the standards that keep a press running clean.
- Heat and chemical resistance
- Stands up to inks, solvents, washes, oils and heat without swelling or glazing.
- The right hardness
- Matched to the job in Shore A, soft enough to transfer evenly and firm enough to hold its shape.
- True and concentric
- Ground to a true cylinder with tight run-out, so it runs smooth without vibration.
- Fine surface finish
- A controlled surface that carries ink or water evenly and washes clean.
- Anti-static
- Releases static charge so ink sits right on the sheet and paper does not cling.
- Holds its shape
- Low compression set and a strong rubber-to-core bond keep it true, run after run.
Services
New builds, recovering, polishing, and emergency turnaround.
New Roller Manufacturing
Build a roller from the core up, made for your press.
Emergency Service
Press down? We rush a recover or a new roller.
Rubber Recovering
Strip a spent covering and build a new one to spec.
Roller Polishing
Restore a true, smooth surface to a worn roller.
Grinding & Resurfacing
Precision-grind a covering back to a true diameter and finish.
Hardness Testing & Inspection
Measure Shore A hardness and check a roller before it ships.
Tell us what your press needs
Send your roller specs and we'll guide the rest.
- More than 20 years making and recovering offset rollers
- Serving print shops across Iran on Heidelberg, Roland, Komori, Mitsubishi, KBA and Sakurai presses
- Each roller built to the hardness and size your machine calls for
- One-year warranty, up to 7 years of service life with proper use